RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
^
Be careful not to drop the drive shaft assembly.
16. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
a. Using pliers, remove the bearing bracket hole snap ring.
b. Remove the bolt from the drive shaft bearing bracket.
c. Using SST, remove the front drive shaft assembly RH.
SST 09520-01010, 09520-24010 (09520-32040)
NOTICE:
^
Be careful not to damage the transaxle case oil seal and inboard joint boot.
^
Be careful not to drop the drive shaft assembly.
DISASSEMBLY
1. REMOVE INBOARD JOINT BOOT NO.2 CLAMP