RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
3. CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)
(a) Turn the power switch off.
(b) Disconnect the F10 power steering ECU connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE POWER STEERING ECU See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Steering/Steering Control Module/Service and Repair/Removal
Certification ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Certification ECU Communication Stop Mode
- Certification ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM