RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
and Repair/Removal and Replacement/Installation
36. INSTALL DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
37. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
38. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
39. INSPECT SRS WARNING LIGHT
(a) Inspect SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
From 08/2009
AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION
1. INSTALL NO. 1 AMPLIFIER BRACKET
(a) Install the No. 1 amplifier bracket with the 2 bolts.
Torque : 4.8 Nm (49 kgf-cm, 43 in-lbf)
2. INSTALL NO. 2 AMPLIFIER BRACKET
(a) Install the No. 2 amplifier bracket with the 2 bolts.
Torque : 4.8 Nm (49 kgf-cm, 43 in-lbf)
3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET
(a) Install the stereo component amplifier assembly with bracket with the bolt and nut.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the 4 connectors.
4. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY
(a) Install the rear seat sub floor panel assembly with the 4 bolts.