RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Installation
12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
14. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
15. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
From 08/2009
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION
1. INSTALL CLEARANCE WARNING ECU ASSEMBLY
(a) Engage the 2 claws to install the clearance warning ECU assembly.
2. INSTALL ECU INTEGRATION BOX
(a) Install the ECU integration box with the bolt and 2 nuts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
3. CONNECT CONNECTOR HOLDER
(a) Engage the claw.
(b) Connect the connector holder with the nut.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(c) Engage the clamp and connect the wire harness.
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation
6. INSTALL INSTRUMENT PANEL GARNISH RH