RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Before using SST, apply grease to the SST bolts.
HINT
Use SST with the "F" mark facing the rear suspension member rear body mounting cushion.
(c) Using SST, install the rear suspension member rear body mounting cushion RH until there is no clearance between the rear suspension member
sub-assembly and the rear suspension member rear body mounting cushion RH.
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
If the rear suspension member sub-assembly is scratched, apply paint to the scratched areas of the rear suspension member
sub-assembly.
(d) Remove SST from the rear suspension member sub-assembly.
6. INSTALL DIFFERENTIAL MOUNT CUSHION (for AWD)
(a) As shown in the illustration, temporarily install the differential mount cushion to the rear suspension member sub-assembly from the rear of the
vehicle.
Text in Illustration
NOTICE:
*
Make sure that the differential mount cushion is aligned within 3° from the center.
*
Be sure to install the differential mount cushion in the correct direction.
(b) Using SST, press the differential mount cushion into the rear suspension member sub-assembly. (Step *1)
Text in Illustration