RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
Before using SST, apply grease to the SST bolts.
HINT
Use SST with the "F" mark facing the rear suspension member rear body mounting cushion.
(c) Using SST, install the rear suspension member rear body mounting cushion LH until there is no clearance between the rear suspension member
sub-assembly and the rear suspension member rear body mounting cushion LH.
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
If the rear suspension member sub-assembly is scratched, apply paint to the scratched areas of the rear suspension member
sub-assembly.
(d) Remove SST from the rear suspension member sub-assembly.
5. INSTALL REAR SUSPENSION MEMBER REAR BODY MOUNT CUSHION RH
(a) Temporarily install the rear suspension member rear body mounting cushion RH while confirming the installation direction.
Standard (A):
15° +/- 5°