RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Text in Illustration
(c) Install the front brake flexible hose and No. 1 sensor clamp together to the shock absorber with the bolt.
Text in Illustration
Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)
(d) Install the No. 2 sensor clamp to the body with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE:
*
Do not twist the wire harness for the front speed sensor when installing it.
*
The bolt tightens the brake flexible hose and front speed sensor together. Make sure that the flexible hose is positioned over the
front speed sensor.
Text in Illustration
(e) Install the 2 clamps and connect the front speed sensor connector.
(f) Install the front fender liner with the 5 clips and 3 screws.