RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Crankshaft Main Bearing Seal: Service and Repair
Installation
Up to 08/2009
2GR-FXE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: INSTALLATION
1. INSTALL REAR ENGINE OIL SEAL
(a) Apply MP grease to a new rear engine oil seal lip.
NOTICE:
Keep the lip free from foreign objects.
(b) Using SST and a hammer, tap in the rear engine oil seal.
Text in Illustration
SST : 09223-15030
SST : 09950-70010
09951-07150
NOTICE:
*
Do not tap the oil seal at an angle.
*
Wipe off extra grease on the crankshaft.
Oil seal tap in depth:
-0.5 to 0.5 mm (-0.0196 to 0.0196 in.)
2. INSTALL FLYWHEEL SUB-ASSEMBLY
(a) Using SST, hold the crankshaft pulley.
SST : 09213-70011
09213-70020
SST : 09330-00021
(b) Clean the 8 bolts and 8 bolt holes.
(c) Apply adhesive to 2 or 3 threads of the 8 bolts.