RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Brake Control Module/Service and Repair/Removal
A -- Continue to next step.
23. CHECK FOR SHORT IN CAN BUS WIRES (SKID CONTROL ECU)
(a) Reconnect the skid control ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
Result:
C -- REPLACE SKID CONTROL ECU See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Electronic
Brake Control Module/Service and Repair/Removal
B -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (for HDD) See: Accessories and Optional
Equipment/Navigation System/Service and Repair/Navigation Receiver (for HDD)/Removal
A -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (for DVD) See: Accessories and Optional
Equipment/Navigation System/Service and Repair/Navigation Receiver (for DVD)/Removal
24. CHECK FOR SHORT IN CAN BUS WIRE (ECM)
(a) Disconnect the ECM connector.
(b) Disconnect the CAN No. 2 junction connector.