RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
_hybrid/Page-1393001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Installation
Up to 08/2009
2GR-FXE EMISSION CONTROL: VACUUM SENSOR: INSTALLATION
1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR
(a) Install the manifold absolute pressure sensor with the 2 bolts.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
(b) Connect the connector.
2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Installation
3. INSTALL FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Shock Absorber (w/ Air Suspension)/Installation
4. INSTALL FRONT SHOCK ABSORBER CAP RH (w/ Air Suspension)
HINT
Use the same procedure for the LH side and RH side.
5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Install the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation.
From 08/2009
2GR-FXE EMISSION CONTROL: VACUUM SENSOR: INSTALLATION
1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR
(a) Install the manifold absolute pressure sensor with the 2 bolts.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
(b) Connect the connector.
2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Installation
3. INSTALL FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Shock Absorber (w/ Air Suspension)/Installation
4. INSTALL FRONT SHOCK ABSORBER CAP RH (w/ Air Suspension)
