RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
(b) Disconnect the wire harness clamp.
(c) Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.
SST : 09224-00010
4. REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the 2 bolts, 2 nuts and No. 3 front exhaust pipe sub-assembly.
(c) Remove the 3 gaskets from the No. 3 front exhaust pipe sub-assembly.
5. REMOVE FRONT EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Removal
6. REMOVE NO. 2 OXYGEN SENSOR
(a) Using SST, remove the No. 2 oxygen sensor from the front exhaust pipe assembly.
SST : 09224-00010
Up to 08/2009
2GR-FXE ENGINE CONTROL: HEATED OXYGEN SENSOR: INSTALLATION
1. INSTALL NO. 2 OXYGEN SENSOR