RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Engine Control Module: Service and Repair
Installation
Up to 08/2009
2GR-FXE ENGINE CONTROL: ECM: INSTALLATION
1. INSTALL ECM
(a) Set the ECM in the engine room ECM box.
(b) Install the engine room ECM cover with the 3 claws.
(c) Install the No. 1 ECM bracket and No. 2 ECM bracket with the 4 bolts.
Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)
(d) Install the wire harness clamp bracket with the 2 bolts.
Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)
(e) Install the ECM with bracket with the 3 bolts.
Torque : 19 Nm (193 kgf-cm, 14 ft-lbf)
(f) Install the cooler pipe with the bolt.