RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
_hybrid/Page-2497005.png)
(d) Dispose of the front seat outer belt assembly.
(1) Remove the wheel and SST.
(2) Place the outer belt in a plastic bag, tie the end tightly, and dispose of it in the same way as other general parts.
CAUTION:
*
The outer belt becomes very hot when the front seat outer belt pretensioner is deployed, so leave it untouched for at least 30
minutes after it has been deployed.
*
Use gloves and safety glasses when handling an outer belt with a pretensioner that has been deployed.
*
Always wash your hands with water after completing the operation.
*
Do not apply water, etc. to a front seat outer belt assembly with a pretensioner that has been deployed.
HINT
When scrapping a vehicle, deploy the front seat outer belt pretensioners, and then scrap the vehicle with the deployed outer belt
installed.
Rear Seat Outer Belt Assembly
SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: DISPOSAL
HINT
When scrapping vehicles equipped with a seat belt pretensioner or disposing of a rear seat outer belt (with a seat belt pretensioner),
always deploy the seat belt pretensioner first in accordance with the procedures described below. If any abnormality occurs during
deployment of the seat belt pretensioner, contact the SERVICE DEPARTMENT of TOYOTA MOTOR SALES, U.S.A., INC.
1. DISPOSE OF REAR SEAT OUTER BELT ASSEMBLY (WHEN INSTALLED IN VEHICLE)
CAUTION:
*
Use gloves and safety glasses when handling a rear seat outer belt with a deployed pretensioner.
*
Always wash your hands with water after completing the operation.
*
Do not apply water, etc. to a rear seat outer belt with a deployed pretensioner.
*
When deploying the seat belt pretensioner, always use the specified SST (SRS airbag deployment tool). Perform the operation in a
place away from electrical interference.
NOTICE:
*
Never dispose of a rear seat outer belt assembly with a pretensioner that has not been deployed.
*
The seat belt pretensioner produces an exploding sound when it deploys, so perform the operation outdoors when it will not
disturb local residents.
*
When deploying a rear seat outer belt (with a seat belt pretensioner), perform the operation at least 10 m (33 ft.) away from the
rear seat outer belt.
*
Be sure to follow the procedure listed below when deploying the seat belt pretensioner.
(a) Check the function of SST.
SST : 09082-00700
NOTICE:
