RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Minimum length:
41.5 mm (1.64 in.)
(e) If the free length is less than the minimum, replace the compression spring.
(f) Install the front No. 3 exhaust pipe sub-assembly with the 2 bolts and 2 compression springs.
Torque : 43 Nm (440 kgf-cm, 32 ft-lbf)
4. INSTALL OXYGEN SENSOR
(a) Using SST, install the oxygen sensor to the center exhaust pipe assembly.
Text in Illustration
SST : 09224-00010
without SST - Torque : 44 Nm (449 kgf-cm, 32 ft-lbf)
with SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)
NOTICE:
*
The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
*
The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) See: Service
Precautions.
*
The "with SST" torque value is effective when SST is parallel to the torque wrench.
(b) Connect the wire harness clamp.