RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
HINT
Pull out the lock of the lock lever, disengage the claw, and raise the lock lever to disconnect the connector as shown in the illustration.
(d) Remove the relay block sub-assembly.
From 08/2009
POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
HINT
Refer to the instructions for Removal of the brake pedal support sub-assembly See: Brakes and Traction Control/Brake Pedal
Assy/Service and Repair/Removal and Replacement/Removal.
3. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
(a) Disconnect the connectors from the instrument panel junction block assembly and power management control ECU.
(b) Remove the 2 nuts.
(c) Disconnect the connectors from the back of the instrument panel junction block assembly.
4. REMOVE AFS ECU
HINT
Refer to the instructions for Removal of the AFS ECU See: Lighting and Horns/Headlamp/Headlamp Alignment Control
Module/Service and Repair/Removal.
5. REMOVE POWER STEERING ECU ASSEMBLY
(a) Remove the 2 nuts, clamp and power steering ECU assembly.