RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Text in Illustration
(b) Fully tighten the nut.
Torque : 100 Nm (1020 kgf-cm, 74 ft-lbf)
NOTICE:
*
The final torque must be applied under standard vehicle height conditions.
*
When tightening the nut, keep the toe adjust cam from rotating.
9. INSTALL REAR SUSPENSION ARM COVER (w/o Air Suspension)
(a) Insert the 2 guides of the rear suspension arm cover to the rear No. 2 suspension arm assembly.
(b) Install the rear suspension arm cover to the rear No. 2 suspension arm assembly with the 2 bolts as shown in the illustration.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
NOTICE:
Make sure that the 2 guides of rear suspension arm cover are inserted.
10. INSTALL REAR SUSPENSION ARM COVER (w/ Air Suspension)
(a) Insert the 2 guides of the rear suspension arm cover to the rear No. 2 suspension arm assembly.
(b) Install the rear suspension arm cover to the rear No. 2 suspension arm assembly with the 2 bolts as shown in the illustration.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
NOTICE:
Make sure that the 2 guides of rear suspension arm cover are inserted.
(c) Check that the rear pneumatic cylinder cover is not deformed or collapsed inward.
11. INSTALL REAR WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)
12. INSPECT FOR AIR LEAK (w/ Air Suspension)