SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-301003.png)
HINT (Re-Lising timing belt): Place matchmarks on the timing belt and camshaft timing pulleys as shown in the illustration.
(a) Alternately loosen the two bolts, and remove them, the tensioner and dust boot.
(b) Disconnect the timing belt from the camshaft timing pulleys
6. Remove camshaft timing pulleys.
Using SST, remove the bolt for the timing pulley. Remove both timing pulleys. SST 09278-54012
7. Remove crankshaft pulley.
(a) Using SST to hold the crankshaft pulley, loosen the pulley mounting bolt. SST 09213-54015 (91651-60855) and 09330-00021
(b) Remove SST and pulley bolt.
