SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-968006.png)
c. Remove the (2) wing nuts and the plate on the bottom of the cooling unit.
CAUTION:
The plate and wing nuts will be reused.
d. Remove the (2) filters from the cooling unit.
2. Clean the Evaporator.
-
Follow the general procedures.
NOTE:
Location for insertion of spray nozzle is indicated by the red arrow in the illustration.
3. Reinstallation of parts.
a. Insert the (2) filters into the cooling unit as shown in the illustration.
NOTE:
