SC 300 L6-3.0L (2JZ-GE) (1992)
Installing Jumper Wire
- Pressurize fuel system by installing a jumper wire between Check Connector terminals +B and FP.
Testing Fuel Injector Operation - Current Applied
- Place injector over a graduated cylinder.
- Apple battery voltage to injector for 15 seconds.
Desired -
70 to 88 cc/15 seconds
Less than 9cc difference between injectors
- Disconnect battery voltage and inspect injector for leakage.
Desired -
One drop per 3 minutes or less
- Remote jumper wire.
- Reinstall injectors.