SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-603002.png)
- Remove throttle body bracket.
Throttle Body Electrical Connectors
- Remove the following connectors and hoses:
^ Throttle position sensor
^ Sub-throttle postion sensor (if equipped)
^ Sub-throttle actuator (if equipped)
^ IAC valve
^ 4 vacuum hoses
Throttle Body Fasteners
- Remove throttle body mounting hardware.
- Disconnect 2 water bypass hoses.
- Remove throttle body and gasket.
- Reverse procedure to install, using a new gasket and noting the following torque values:
Throttle body - 15 ft.lb (21 Nm)
Throttle body bracket - 15 ft.lb (21 Nm)
