SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-857001.png)
Neutral Safety Switch: Service and Repair
Fig. 13 Neutral Start Switch Replacement
1.
Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2.
Raise and support vehicle, then remove front exhaust pipe.
3.
Disconnect neutral switch electrical connector.
4.
Remove control shaft lever, then remove lock washer and nut, Fig. 13.
5.
Remove switch attaching bolt, then remove.
6.
Reverse procedure to install. Rearm airbag as described previously.
