SC 400 V8-4.0L (1UZ-FE) (1997)
/Page-1911001.png)
Air Door Actuator / Motor: Service and Repair
Air Inlet Servomotor
AIR INLET SERVOMOTOR REMOVAL
1. REMOVE THESE PARTS:
(a) No.2 under cover
(b) Glove compartment assembly
(c) Lower finish panel RH
2. REMOVE SERVOMOTOR
(a) Disconnect the connector.
(b) Disconnect the control link.
(c) Remove the 3 screws and the servomotor.
AIR INLET SERVOMOTOR INSTALLATION
Installation is in the reverse order of removal.
