SC 400 V8-4.0L (1UZ-FE) (1997)
Relay Box: Locations
A/C CONTROL ASSEMBLY DISASSEMBLY
1. SEPARATE CONTROL PANEL FROM CASE
(a) Cut up cloth tapes affixed on both sides of the case, as shown in the illustration.
(b) Remove the 2 screws and release the 6 claws to separate the control panel from the case.
(c) Disconnect the 2 connectors and separate the control panel from the case.
(d) Remove the wire harness from control panel.
2. REMOVE NIGHT ILLUMINATION BULB
Using a flat-bladed screwdriver, remove the night illumination bulbs.