SC 430 V8-4.3L (3UZ-FE) (2003)
Alternator: Service and Repair
REPLACEMENT
1. SEPARATE BATTERY NEGATIVE TERMINAL
2. REMOVE AIR CLEANER INLET NO.1
3. REMOVE V-BANK COVER
4. REMOVE FAN AND GENERATOR V BELT
5. REMOVE ENGINE UNDER COVER
6. REMOVE VANE PUMP PULLEY
a. Using SST, remove the nut and vane pump pulley.
SST 09960-10010 (09962-01000, 09963-01000)
7. REMOVE GENERATOR
a. Disconnect the generator connector.
b. Remove the rubber cap and nut, and disconnect the generator wire.
c. Disconnect the engine wires and PS hose.
d. Remove the nut, bolt, stay and generator
e. Remove the 2 clamps from the cord clips on the generator.
8. INSTALL GENERATOR
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
9. INSTALL VANE PUMP PULLEY
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
SST 09960-10010 (09962-01000, 09963-01000)
10. INSTALL ENGINE UNDER COVER
11. INSTALL FAN AND GENERATOR V BELT
12. INSTALL V-BANK COVER
13. INSTALL AIR CLEANER INLET NO.1
14. CONNECT BATTERY NEGATIVE TERMINAL
OVERHAUL