lincoln Workshop Repair Guides

Lincoln Aviator 2WD V8-46L DOHC Workshop Service and Repair Manuals

Drive Belts, Mounts, Brackets and Accessories > < Mechanical Specifications|Page 3402
Page 1
background image

Valve: Specifications

Valve arrangement (front to rear - intake, LH) b .................................................................................................................................................  All primary
Valve arrangement (front to rear - exhaust, LH) b ...............................................................................................................................................  All primary
Valve arrangement (front to rear - intake, RH) b .................................................................................................................................................  All primary
Valve arrangement front to real) - exhaust, RH) b ..............................................................................................................................................  All primary 
Valve head diameter - intake ....................................................................................................................................................................  37 mm (1,46 inch)
Valve head diameter - exhaust ..................................................................................................................................................................  30 mm (1.18 inch)
Valve head diameter - gauge diameters ......................................................................................................................  35.0 and 28.0 mm 1.378- 1. 102 inch)
Valve face runout .................................................................................................................................................................................  0.05 mm (0.002 inch)
Valve face angle .................................................................................................................................................................................................  45.5 degrees

b P=Primary, S=Secondary, E=Exhaust

Drive Belts, Mounts, Brackets and Accessories > < Mechanical Specifications|Page 3402