Aviator 2WD V8-4.6L DOHC (2003)
6. Remove the components in the order indicated in the illustration and table.
7. To install, reverse the removal procedure.
Item 1: Front Axle Bolts Removal Note
1. CAUTION: Do not allow the inner halfshaft boots to contact the lower control arms. Damage to the boots can occur.
Support the front axle using an appropriate jack. Lower the front axle approximately 150 mm (6 inch).
Item 6: Oil Pan Removal Note
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs, or other abrasive means to clean the sealing surfaces. These can cause
scratches and gouges resulting in leak paths. Use a plastic scraper to clean the sealing surfaces.
Clean the sealing surfaces with metal surface cleaner.
