Aviator 2WD V8-4.6L DOHC (2003)
4. Remove the components in the order indicated in the illustration and table.
Item 3: Vacuum Connector Removal Note
1. Disconnect the vacuum line connectors in the engine Compartment.
2. Detach the grommet and push the vacuum lines into the passenger compartment.
INSTALLATION
1. To install, reverse the removal procedure.
2. Lubricate the refrigerant system with the correct amount of clean PAG oil.
3. Fill and bleed the engine cooling system.
4. Evacuate. leak-test and charge the refrigerant system.
