Aviator 2WD V8-4.6L DOHC (2003)
Throttle Body: Service and Repair
THROTTLE BODY
CAUTION: Throttle body bore and plate area have a special coating and cannot be cleaned, or possible damage to the throttle body can occur.
REMOVAL
1. Remove the engine appearance cover.
2. Remove the air cleaner outlet tube.
3. Remove the components in the order indicated in the illustration and table.
INSTALLATION
1. To install, reverse the removal procedure.
Item 5: Throttle Body Bolts Installation Note
1. Tighten the bolts to 10 Nm (89 lb-in), then rotate an additional 90 degrees.