Aviator 2WD V8-4.6L DOHC (2003)
Air Bag Control Module: Vehicle Damage Warnings
CAUTION:
-
If the safety canopy module has deployed, the tether cord rivet nut must be inspected and replaced if damaged before installing a new
safety canopy.
-
Installing a J-nut in place of a weld nut is not a recommended repair.
-
Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage can result.
-
Putting the large RCM electrical connector into the RCM on an angle can cause bad electrical connections and damage components.
-
Do not push the connector on to where the lever pivots and seats itself. Light pressure is needed to get the connector into position on the
RCM before using the lever to fully seat the connector.