Aviator 2WD V8-4.6L DOHC (2003)
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
WARNING: All safety belt assemblies including retractors, buckles, shoulder belt height adjusters (if so equipped) child safety seat tether
attachments and attaching hardware should be inspected after any collision. All belt assemblies should be replaced unless a qualified technician
finds the assemblies show no damage and operate properly. Belt assemblies not in use during a collision should also be inspected and replaced if
either damage or improper operation is noted.
NOTE: RH side shown, LH side similar.
1. To access the shoulder height adjuster, position aside the C-pillar upper trim panel.
2. To access the second row safety belt buckle, tilt the second row seat forward.
3. To access the second row safety belt retractor, remove the rear quarter trim panel.
