Aviator 2WD V8-4.6L DOHC (2003)
3. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.
Remove the clamps.
4. Loosen the nuts.
^
Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.
5. Rotate the front wheel spindle tie-rods.
6. Start the engine and recenter the steering wheel.
^
Recheck the toe settings and adjust if necessary.
7. CAUTION: Make sure to hold the tie-rod end stationary with a wrench while tightening Me nut or damage to the boot can occur.
NOTE: Make sure that the toe settings are not disturbed while tightening the nuts.
Tighten the nuts.