Aviator 2WD V8-4.6L DOHC (2003)
1. Loosen the clamp and disconnect the hose. Drain the fluid into a suitable container.
Item 8: Belt Tensioner Removal Note
1. Rotate the tensioner clockwise and remove the belt from the power steering pump pulley.
Item 12 and Item 20: Power Steering Pressure Line Removal Note
1. Remove and discard the 0 rings.
Item 20 and Item 12: Power Steering Pressure wine Installation Note
1. Install new seals on the power steering pressure hose. Using the special tool. stretch the seal until it is large enough to slip over the tube nut.