Aviator 2WD V8-4.6L DOHC (2003)
Part 3 Of 3
3. To install, reverse the removal procedure.
4. Partially fill the transmission,
Item 5: Reverse Servo Screws Installation Note
1. Install the reverse servo. Tighten the screws in the sequence shown in two stages.
^
Stage 1: Tighten screws to 5 Nm (44 inch lbs.)
^
Stage 2: Tighten screws to 11 Nm (8 ft. lbs.)
Item 3: Transmission Fluid Pan Installation Note
1. Install the transmission fluid pan and gasket, and loosely install the screws.
Item 2: Transmission Fluid Pan Screws Installation Note
1. Tighten the screws in a crisscross sequence.