Aviator 2WD V8-4.6L DOHC (2003)
1. CAUTION: The digital TR sensor must fit flush against the boss on the case to prevent damage to the sensor.
Install the digital TR sensor and loosely install the screws.
Item 22: TR Sensor Screws Installation Note
1
CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
Item 26: TR Sensor Electrical Connector Installation Note
1. Connect the digital TR sensor connector.
