Aviator 2WD V8-4.6L DOHC (2003)
3. If necessary, install a new brake anti-lock sensor indicator on the outer CV joint.
4. CAUTION: To prevent damage to the axle shaft oil seal, install the Differential Seal Protector before positioning the inboard CV joint housing in
the axle.
CAUTION: Always install the halfshaft with a new retainer circlip and a new rear axle wheel hub retainer.
Install a new retainer circlip.
5. For the inboard CV joint, carry out the following:
1
Position the clamp on the interconnecting shaft.
2
Position the boot on the interconnecting shaft.
3
Install the tri-lobe insert.
6. Using the special tool, install the CV Joint.
