Aviator 2WD V8-4.6L DOHC (2003)
Drive/Propeller Shafts, Bearings and Joints: Service and Repair
Rear Driveshaft - 4x2
Special Tool(s)
1. With the vehicle in NEUTRAL, position on a hoist.
2. Index-mark the driveshaft flange to the rear axle pinion flange.
3. NOTE: Make sure the index marks on the extension housing and driveshaft are aligned before separation.
NOTE: After removing the driveshaft, place an index mark on the transmission output shaft that matches the transmission extension housing
mark.
Index-mark the driveshaft and the extension housing.
4. Remove the components in the order indicated in the following illustration and table.