Aviator 2WD V8-4.6L DOHC (2003)
5. Press the front window control switch (LF) to the AUTO position six times (AUTO up or AUTO down).
6. Turn the ignition key to the ON position and close the LF door. The LF window glass will move down-up-down-up approximately 2-3 mm (0.1
in). This down-up-down-up movement indicates that the LF window motor has entered initialization mode.
7. Pull and hold the front window control switch (LF) to the UP position until the window glass stalls into the upper header seal.
8. Momentarily press the front window control switch (LF) to the DOWN position and release. The window will carry out a one-touch down
operation until the window glass stalls at the bottom of travel stop designed into the window regulator.
9. Pull and hold the front window control switch (LF) to the UP position. Continue to hold the switch until after the window glass stalls into the
upper header seal and carries out the down-up movement. This down-up movement approximately 2-3 mm (0.1 in). indicates that the LF window
motor has been successfully initialized.
10. Verify correct operation of the LF window by carrying out a one-touch down, one-touch up, proportional down, and proportional up. If the
window does not operate correctly, carefully repeat this procedure.
