lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Rear Door > < Front Door Window Regulator|Service and Repair|Page 9037
Page 4
background image

1. NOTE:  The LF window motor must be reinitialized whenever: the motor is removed from window regulator drum housing, a new motor is

installed, a new window regulator is installed, a new window glass is installed, glass top run removal or installation, or when carrying out any
operation in which grease or lubricants are applied to the window system. A new LF window motor will be in a proportional up/down mode until
initialized.

Use a flat-blade screwdriver between the window regulator motor and window regulator assembly to hold the window regulator assembly drum in
place.

Item 11: Glass Top Run Assembly Removal Note

1. NOTE:  The LF window motor must be reinitialized whenever: the motor is removed from window regulator drum housing, a new motor is

installed, a new window regulator is installed, a new window glass is installed, glass top run removal or installation, or when carrying out any
operation in which grease or lubricants are applied to the window system. A new LF window motor will be in a proportional up/down mode until
initialized.

Remove the glass top run assembly up through the top opening of the front door.

Rear Door > < Front Door Window Regulator|Service and Repair|Page 9037