Aviator AWD V8-4.6L DOHC VIN H (2003)
Compressor Clutch: Description and Operation
A/C COMPRESSOR AND CLUTCH ASSEMBLY
SC 115 Compressor Clutch
NOTE:
-
Internal A/C compressor components are not serviced separately. The SC115 A/C compressor is serviced only as an assembly. The clutch plate.
clutch pulley and bearing. and clutch field coil are serviceable.
-
Installation of a new receiver/drier is not required when repairing the air conditioning system except when there is physical evidence of system
contamination from a failed A/C compressor or damage to the receiver/drier.
-
Vehicles equipped with Visteon fixed scroll A/C compressors may experience rapid refrigerant high side pressure fluctuations upon cold startups
and/or after refrigerant system recharges. These high side refrigerant fluctuations are characteristic of the Visteon fixed scroll compressor and not
an indication of a falling/failed A/C compressor.
The SC115 A/C compressor has [he following characteristics:
-
Tangential mount design three lugs.
-
The single manifold block of the compressor manifold and tube assembly fits to the suction and discharge ports. Two O-ring seals are used for
sealing.
-
An eccentric bushing is driven by the shaft of the A/C compressor.
-
An orbiting scroll driven by the eccentric bushing compresses the refrigerant gas against the walls of the fixed scroll.
-
Single reed-type discharge valve mounted on the back of the fixed scroll. There are no suction valves.
-
Non-serviceable shaft seal fully supported on both sides by bearings.
-
The A/C compressor uses PAG oil or equivalent. This oil contains special additives required for the A/C compressor.
-
The A/C compressor oil from vehicles equipped with a SC115 A/C compressor may have some slightly dark-colored streaks while maintaining
normal oil viscosity. This is normal for this A/C compressor because of break-in wear of the scroll seals that can discolor the oil.
-
Use standard oil matching procedures when installing new compressors.
The magnetic A/C clutch has the following characteristics:
-
It drives the compressor shaft.
-
When battery voltage is applied to the A/C compressor clutch field coil, the clutch plate and hub assembly is drawn toward the A/C clutch
pulley.
-
The magnetic force locks the clutch plate and hub assembly and the A/C clutch pulley together as one unit, causing the compressor shaft to rotate.
-
When battery voltage is removed from the A/C compressor clutch field coil, springs in the clutch plate and hub assembly move the clutch plate
away from the A/C clutch pulley.