lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 9818 > < Air Bag Disarming and Arming|Page 9816
Page 8
background image

20. Attach the restraint system diagnostic tool to the vehicle harness side of the LH safety canopy electrical connector.
21. Install the RCM fuse F2.12 (15A) to the CJB.
22. Connect the battery ground cable.

Reactivation

Warning:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the deactivation
procedure.

1. Remove the RCM fuse F2.12 (15A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.

3. Remove the restraint system diagnostic tool from the LH safety canopy vehicle harness electrical connector.

Air Bag Disarming and Arming|Page 9818 > < Air Bag Disarming and Arming|Page 9816