Aviator AWD V8-4.6L DOHC VIN H (2003)
1. Remove and discard the left lower arm-to-frame rearward mounting nut and bolt.
2. Install the cam, bolt and nut.
^
Snug the nut.
3. Rotate the cam bolt to adjust the left side caster.
4. CAUTION: Make sure that the weight of the vehicle is resting on the wheel and tire assemblies before tightening the nut.
While holding the cam, tighten the nut.
5. Check the caster and, if necessary, repeat the procedure.
Toe Adjustment
Front Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position using a suitable holding device. :
