lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Impact Sensor|Removal and Installation|Page 8196 > < Impact Sensor|Removal and Installation|Page 8194
Page 5
background image

supplemental restraint system (SRS) deactivation/reactivation procedure.

Reactivate the supplemental restraint system (SRS).

6. Connect the battery ground cable.

7. WARNING:  The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure

to remove could result in injury and possible violation of vehicle safety standards.

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure

8. Check the active restraint system for correct operation.

Item 3: Side Impact Sensor Installation Note

1. Make sure the bolt, washer and clip are in place on the side impact sensor before installing it to the vehicle.

2. Align the locator pegs to the openings in the B-pillar sheet metal.

Second Row, C-Pillar

SIDE IMPACT SENSOR - SECOND ROW,C-PILLAR

Impact Sensor|Removal and Installation|Page 8196 > < Impact Sensor|Removal and Installation|Page 8194