Aviator AWD V8-4.6L DOHC VIN H (2003)
Part 2
1. To install, reverse the removal procedure.
2. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the seat
removal and installation procedure.
When servicing the safety belt pretensioner, install the affected seat.
3. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system(SRS) deactivation/reactivation procedure.
When servicing the safety belt pretensioner, reactivate the supplemental restraint system (SRS).
4. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
When servicing the safety belt pretensioner, with all the restraint system diagnostic tools removed, prove out the supplemental restraint system
(SRS). See: Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure
5. Check the active restraint system for correct operation.
Item 5: Shoulder Height Adjuster Installation Note
1. Rotate the safety belt height adjuster upward to engage the lower tab.
Item 2: Upper B-Pillar Trim Panel Installation Note
1. Raise the safety belt height adjuster and trim panel slider plate to the, uppermost position for correct installation.
Second Row, 40/20/40
REAR SAFETY BELT - SECOND ROW 40/20/40
