lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seat Belt Height Adjuster > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 8337
Page 1
background image

Seat Belt Extension: Description and Operation

SAFETY BELT EXTENSION ASSEMBLY

In certain cases, the safety belt may be too short even when it is fully extended. About 20 cm (8 in) can be added to the belt length by using a safety
belt extension. Safety belt extensions are available at no cost from any Ford or Lincoln-Mercury dealer parts department. Safety belt extensions are
only available with black webbing.

There are two extension assemblies available, one for the front seating positions and one for the rear seating positions and they are not
interchangeable.

Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label.
Also, use the safety belt extension only if the safety belt is too short for you when fully extended. Do not use an extension to change the fit of the
shoulder belt across the torso.

Seat Belt Height Adjuster > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 8337