Aviator AWD V8-4.6L DOHC VIN H (2003)
3. CAUTION: Do not allow the steering column shaft to rotate while the intermediate shaft is disconnected or damage to the clockspring can result.
If there is evidence that the shaft has rotated, the clockspring must be removed and recentered.
Remove the components in the order indicated in the illustration and table.
4. To install, reverse the removal procedure.
5. Fill, purge and leak test the system.
6. Check and, if necessary, adjust the front toe.
Item 12: Tie-Rod End Removal Note
1. Using the special tool, separate the tie-rod end from the wheel knuckle.
Item 13: Brake Disc Removal Note
1. Rotate the front of the brake rotor outward.
Item 15: Shock Absorber Bolt Removal Note
1. On 4x4 vehicles, remove the lower shock absorber bolt.
