Aviator AWD V8-4.6L DOHC VIN H (2003)
Item 17: Stabilizer Bar Link- to-Lower Arm Nut Removal Note
1. Tap on the end of the stud to separate the stud from lower arm.
2. If necessary, pry downward on the stabilizer bar to detach the link from the arm.
Item 24: Lower Arm Installation Note
1. Check and, if necessary, align the front end.
Item 22: Lower Arm-to-Frame Nut (rearward mounting) Installation Note
1. Do not tighten until the installation procedure is complete and the weight of the vehicle is resting on the wheel and tire assemblies.
Item 20: Lower Arm-to-Frame Nut (forward mounting) Installation Note
1. Do not tighten until the installation procedure is complete and the weight of the vehicle is resting on the wheel and tire assemblies.
Item 16: Upper Arm Installation Note
1. Check and, if necessary, align the front end.
Item 13: Wheel Knuckle Installation Note
1. Check and, if necessary, align the front end.
