Aviator AWD V8-4.6L DOHC VIN H (2003)
1. CAUTION: Use care not to damage the fluid pan rail surface when installing the retaining pin.
NOTE: Align the manual control lever shaft alignment groove with the manual control lever shaft spring pin bore in the transmission case.
Install the manual control lever shaft spring pin.
^
Tap the manual control lever shaft spring pin into the transmission case.
Item 6: Manual Control Lever Inner Nut Installation Note
1. CAUTION: To avoid damage, do not allow the wrench to strike the manual valve inner lever pin.
Tighten the nut.
Item 7: Manual Valve Detent Spring Installation Note
1. With the manual lever in the NEUTRAL position, install the manual valve detent spring.
Item 13: Extension Housing Installation Note
1. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the 4x4 extension housing.
2. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the 4x2 extension housing.