Continental V8-281 4.6L DOHC VIN V MFI (1997)
Air Bag(s) Arming and Disarming: Service and Repair
Prove Out System
Prior to attempting diagnostic prove out on a serviced vehicle, thoroughly check RH primary crash front air bag sensor and bracket, LH primary crash
front air bag sensor and bracket, air bag diagnostic monitor and wiring for damaged or pinched wires which may cause the air bag diagnostic monitor to
blow the 10 amp air bag battery feed fuse.
After all service, verify the air bag indicator. This means turn the ignition switch to RUN and observe the flashes. If the air bag indicator comes on
continuously for six seconds and then goes out, and if no Diagnostic Trouble Codes (DTCs) flash within 30 seconds the air bag system is functioning
properly and all malfunctions have been serviced. Refer to Testing and Inspection for additional diagnostic information.
