Continental V8-302 5.0L (1984)
FIGURE 6
Power Pull Down Latch to Actuator Striker Alignment
Correct adjustment procedures for the power pull down latch is described in the 1984 Car Shop Manual "A" and "B" Section 44-41; However, if
continuous latch cycling occurs inspect the alignment of the latch to the actuator striker to assure proper switch contact and shut off. Continuous cycling
of the power latch is usually caused by misalignment of the latch striker. Figure 6 indicates correct alignment of the latch and actuator striker.
Luggage Compartment Door Margins
Dealers performing service on luggage compartment door margins must be aware of the alignment requirement for the power pull down latch
compartment door to maintain margins to the quarter panel. The margins should not be aligned without checking the critical alignment of the latch to the