Continental V8-302 5.0L (1984)
4.
Lower the engine in to position making sure that the insulators are seated flat on the No. 2 crossmember and that the insulator studs are at the
bottom of the modified slots.
5.
Install the insulators to the No. 2 crossmember using the attaching nut assemblies. Torque nuts to 108-144 Nm (80-106 ft.lbs.).
6.
Install the fan shroud attaching screws and tighten to specification.
PART NUMBER
PART NAME
CLASS
E45Y-6038-D
Insulator -
R
Engine Support (RH)
E45Y-6038-C
Insulator -
R
Engine Support (LH)
N803226-S190
Nut (Pkg, of 5)
S
E45Y-6038-F
Insulator -
C
Engine Support (RH) Mark VII LSC Only
E45Y-6038-E
Insulator -
C
Engine Support (LH) Mark VII LSC Only
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP6038B85
TIME:
1.0 Hr.
DLR CODING:
Basic Part No. 6038 - Code: 11